How to use surgical film?
 Feb 11, 2020|View:553

1. Select the applicable specifications corresponding to the clinical needs, after the disinfectant on the skin is dried, consider taking out the transparent surgical film from the packaging bag, peeling off the isolation paper, and then cover the surgical film on the skin smoothly;

2. Smooth the transparent surgical film so that there is no air bubble between it and the skin;

3. The operation was performed in the operating room along with the surgical site;

4. When the skin was sutured at the end of the operation, the membrane of the incision edge was removed by 1-3cm, and the membrane was removed after the skin was sutured.


In general, film viscosity: 14-15g / mm, no adhesive free-range ≥ 1mm is allowed at the adhesive position; dust on release paper: maximum diameter ≤ 1mm, < 1 / cm2; no fiber or lint ≥ 5mm is allowed on the film, and the product should be sterile.

transparent surgical film

Matters needing attention

1. Open the package only when using it. Do not use if the package is damaged.

2. Disposable, please destroy after use.

3. It can't replace suture, hemostasis, skin disinfection and other measures.

4. It should be applied to the skin naturally, without tension caused by pulling, causing damage to the skin.

5. When removing the protective film, please pay attention to the tubes or instruments covered below, which cannot be pulled off.

CopyRight © 2019-2024   BETTERING INTERNATIONAL(HK) CO.,LIMITED  All rights reserved  Sitemap  All tags   Designed by Zhonghuan Internet